1/5 Scale Brushless Ready Electric Dragster Roller

Primal RC is proud to introduce the 1/5 Scale Quicksilver Electric Dragster Roller!
We hope that its High quality parts, performance and good looks will give you many hours of exciting tire shredding, asphalt burning RC Dragster Racing Fun!
We used lots of CNC aluminum and carbon fiber parts to make this a strong, reliable, fast machine while keeping the weight down.

Standard Features

• Carbon Fiber Lower frame plates, front lower wing mount and rear wing sides
• High performance modified 8000 RPM clutch for great launches off the starting line
• 17 tooth steel pinion gear and 54 tooth nylon spur gear for good overall speed and acceleration
• Large rear high traction white letter belted drag racing tires with medium compound foams
• Chrome plated rear heavy duty nylon rims with aluminum bead-locks and steel 24mm hex inserts for added strength
• Chrome plated front wheels with straight ribbed racing tires
• Oversize rear adjustable aluminum wing with carbon fiber sides
• Light weight Front Poly-carbonate wing with carbon fiber mount
• Strong Plastic roll cage and Poly carbonate body shell
• Dual Rear mechanical disc brake system with carbon fiber rotors
• Ball bearings used throughout the entire vehicle

Electronic Equipment Included

• 20KG All metal gear servo for precision steering
• 20KG All metal gear brake servo

Brush-less Dragster Special Features

• Centrifugal Clutch Power Take off system for precise quick power full launches off the line
• Unlike the gas powered Dragster This can have reverse depending on how you set up your ESC
• Dual Rear mechanical disc brake system with carbon fiber rotors

Aluminum parts

• Aluminum Main frame brace for strength and rigidity.
• CNC Aluminum parts throughout the entire vehicle!
• CNC Aluminum 3 Piece transmission with Steel gears and Locked Axle.
• CNC Aluminum Axle tubes, supports and hubs
• CNC Aluminum locker with steel gear installed
• CNC Aluminum rear upper and lower main Chassis.
• CNC Aluminum upper brake pad support
• CNC Aluminum rear wing supports and mounts
• CNC Aluminum spur gear plate and cover
• CNC Aluminum enclosed clutch brace
• CNC Aluminum motor mounts
• CNC Aluminum chassis connector
• CNC Aluminum front skid plate and chassis protector
• CNC Aluminum Ball bearing push-pull steering system
• CNC Aluminum front axle supports and hubs
• CNC Aluminum rear inner and outer Tire Bead-locks and enclosed wheel nuts
• CNC Aluminum rear brake calipers and linkages

Specifications
Skill Level Advanced
Speed 70+MPH (depending on equipment used)
Length 61 inches
RTR Weight About 24 pounds
Height 15.25 inches
Wheelbase 48.25 inches
Front Tires (pre-glued) 3.25 x 2.125 inches
Front Wheels 2.375 x .875 inches
Front Track 7 inches
Rear Tires (bead-lock) 7.25 x 4 inches
Rear Wheel Outer Diameter 4.75 inches
Rear Wheel Inner Diameter 5.5 x 3.5 inches wide
Minimum Ground Clearance 0.5 inches
Rear Track 17.25 inches
Front Track 7 inches
Motor NOT Included
ESC NOT Included
Transmission Single Speed
Differential Type Locked
Brake Rear Mechanical Disc Brakes
Drive System 8000RPM centrifugal 2 Shoe racing clutch, All Steel Gears with 1 Nylon Spur Gear
Steering Push / Pull design with CNC Aluminum, Ball Bearing Support
Radio NOT Included
Servos Torque: 20 KG, Speed 0.12 sec/60 degrees(6.0V)
Battery Tray 140mm x 85 mm with hook and loop style holding straps

Needed to complete:

LIPO Batteries
Battery Charging Equipment
1/5 Scale Brushless Motor with 8MM Shaft, (Primal RC 960KV, PRQS66082-18P (35mm mounting bolt distance)
1/5 Scale Brushless 200AMP or Better ESC (Primal RC 200A, PRQSKE02003P or Mamba XL X 34V ESC)
2 Channel or Better Radio and Receiver
Primal RC Wheelie Bar (PRQS0001) Highly Recommended

Everything in pictures is Included!