QS 1/5 Scale RTR QuickSilver Electric Dragster

Overview

> 70+ MPH
> 5+ Feet long
> 960KV 3500KW 8 Pole brush-less motor
> 200A Waterproof Speed Control with built in BEC
Sale Price: $1,299.98
Compared at: $1,599.98
You Save: $300.00
Product ID : PRQS1001RTR

Purchase

Description

Primal RC is proud to introduce the 1/5 Scale Quicksilver Ready to Run Brush-Less Electric powered Dragster!
We hope that its High quality parts, performance and good looks will give you many hours of exciting tire shredding, asphalt burning RC Dragster Racing Fun!
We used lots of CNC aluminum and carbon fiber parts to make this a strong, reliable, fast machine while keeping the weight down.

Standard Features
  • Carbon Fiber Lower frame plates, front lower wing mount and rear wing sides
  • 960KV 3500KW 8 Pole Brush-less Motor
  • 200 Amp Waterproof Speed Control with built in BEC
  • High performance modified 8000 RPM clutch for great launches off the starting line
  • 17 tooth steel pinion gear and 54 tooth nylon spur gear for good overall speed and acceleration
  • Large rear high traction white letter belted drag racing tires with medium compound foams
  • Chrome plated rear heavy duty nylon rims with aluminum bead-locks and steel 24mm hex inserts for added strength
  • Chrome plated front wheels with straight ribbed racing tires
  • Oversize rear adjustable aluminum wing with carbon fiber sides
  • Light weight Front Polycarbonate wing with carbon fiber mount
  • Strong Plastic roll cage and Polycarbonate body shell
  • Dual Rear mechanical disc brake system with carbon fiber rotors
  • Ball bearings used throughout the entire vehicle
Electronic Equipment
  • 2.4 ghz 3 channel computer radio that features include:
  • 4-AA Battery holder for light weight and improved balance
  • Easy to read LCD screen
  • 300 Meter max range 10 model memory
  • Servo reversing on all channels
  • Dual rate steering
  • End point adjustment on all channels
  • Exponential steering and throttle
  • Digital trim display
  • Servo sub-trim for steering and throttle
  • 3 character model naming
  • Low battery memory retention
  • Built in Fail-safe
  • Low voltage alarm.
  • 20KG All metal gear servo for precision steering
  • 20KG All metal gear brake servo
Brush-less Dragster Special Features
  • Centrifugal Clutch Power Take off system for persise quick powerfull launches off the line
  • Has reverse! Unlike the gas powered Dragster
  • 8S Lipo Battery Ready (2 -4S batteries recommended) a total of 29.6 Volts!

Aluminum parts
  • Aluminum Main frame brace for strength and rigidity.
  • CNC Aluminum parts throughout the entire vehicle!
  • CNC Aluminum 3 Piece transmission with Steel gears and Locked Axle.
  • CNC Aluminum Axle tubes, supports and hubs
  • CNC Aluminum locker with steel gear installed
  • CNC Aluminum rear upper and lower main Chassis.
  • CNC Aluminum upper brake pad support
  • CNC Aluminum rear wing supports and mounts
  • CNC Aluminum spur gear plate and cover
  • CNC Aluminum enclosed clutch brace
  • CNC Aluminum motor mounts
  • CNC Aluminum chassis connector
  • CNC Aluminum front skid plate and chassis protector
  • CNC Aluminum Ball bearing push-pull steering system
  • CNC Aluminum front axle supports and hubs
  • CNC Aluminum rear inner and outer Tire Bead-locks and enclosed wheel nuts
  • CNC Aluminum rear brake calipers and linkages

Specifications
Skill Level    Advanced
Speed    70+ MPH
Length    61 inches
RTR Weight    About 24 pounds
Height    15.25 inches
Wheelbase    48.25 inches
Front Tires (pre-glued)    3.25 x 2.125 inches
Front Wheels    2.375 x .875 inches
Front Track    7 inches
Rear Tires (beadlock)    7.25 x 4 inches
Rear Wheel Outer Diameter    4.75 inches
Rear Wheel Inner Diameter    5.5 x 3.5 inches wide
Minimum Ground Clearance    0.5 inches
Rear Track    17.25 inches
Front Track    7 inches
Motor   960KV 8-Pole Brushless
ESC   200A Waterproof 
Transmission    Single Speed
Differential Type    Locked
Brake    Rear Mechanical Disc Brakes  
Drive System    8000RPM centrifugal 2 Shoe racing clutch,  All Steel Gears with 1 Nylon Spur Gear
Steering    Push / Pull design with CNC Aluminum, Ball Bearing Support
Radio    2.4 Ghz, 3 Channel Digital Radio
Servos    Torque: 20 KG, Speed 0.12 sec/60 degrees(6.0V)
Battery Tray    140mm x 85 mm with hook and loop style holding straps

Needed to complete:

 2-4S LIPO Batteries (5000mah 30C or more) with 6.5mm connectors
 Battery Charging Equiptment
 4-AA Batteries for Transmitter
 Primal RC Wheelie Bar (PRQS0001) Highly Recommended


Everything in pictures is Included!

Follow us on:

Newsletter: